Visit our Facebook page
Subscribe to our Youtube channel
SRS-A1: official release
Dear All,
Today we're glad to announce that the airsoft Desert Tech Stealth Recon Scout A1 by Silverback Airsoft will be released on November 25th.
Our airsoft version of this awesome bullpup sniper rifle is built only in high quality materials:
- In order to respect most of the awesome features of the original SRS, we had to develop a new patented spring bolt system, push forward compression, spring guide less design. The bolt is made of a steel cylinder, steel cylinder head and steel bolt handle. Piston assembly is made of 6061 aluminium. It features a steel piston sear and the system will allow bolt quick change, no tools needed. Muzzle energy will range between 0.9 Joules to 1.7 Joules depending on your country regulations.
-Compatible with AEG silent piston heads and AEG springs (with a compressed length strictly inferior to 46mm and an inside diameter strictly superior to 11mm).
-Monolithic receiver: CNC 6061 T6 aluminium, a massive piece, over one kilogram, featuring the quick change attachment system patented by Desert Tech LLC. Each receiver has a unique CNC engraved serial number.
-Outer barrels made by CNC , 6061 T6 aluminium, deep fluting for 22'' and 26', with an inner diameter of 8.56mm, the AEG standard, eliminating the necessity of barrel spacers. The airsoft SRS is equipped with a 6.05mm brass inner barrel.
-Two way aluminium hop up unit, directly attached to the quick change barrel assembly, allowing barrel switch in seconds while keeping your hop up setting. Hop up setting is done by two screws on top of the rifle, through the receiver, with the provided key, without removing the barrel, the magazine or the optic.
-Railed handguard: CNC 6061 T5 aluminium and fiber reinforced nylon additional rails (3 pieces included). Rail system is attached to the receiver via a sturdy 38x2mm thread.
-Rifle stock is made of fiber reinforced nylon. Black, Flat Dark Earth and OD colors are available
-Fiber reinforced nylon buttpad extension (2 pieces included)
-Steel magazine, with reinforced nylon internal, 30 rounds capacity.
-Monopod, included with all Silverback Airsoft SRS, accurate replica of the Desert Tech LLC patented monopod, CNC 6061 aluminium.
-CNC aluminium trigger, with position and preload adjustment.
-No injection molding metal parts, no zinc alloy, all screws are in 10.9 steel.
The Silverback Airsoft SRS will be available in three versions:
-SRS A1 Covert, with a short handguard, 16 inches outer barrel and a checkered thread protection (420 mm inner barrel) with an overall length of 675 mm, minimum weight: 3.00 Kg.
-SRS A1 .308, with long handguard , 22 inches fluted outer barrel and the .308 flash hider (578 mm inner barrel) for an overall length of 850 mm, minimum weight: 3.22 Kg.
SRS A1 .338 LM, with long handguard , 26 inches fluted outer barrel and the .338LM flash hider (680 mm inner barrel) with an overall length of 980 mm, minimum weight: 3.34 Kg.
Spare barrels, handguards , rails, buttpad spacer, spare bolt, flash hiders and magazines will be available at the same time as the replica.
Today we're glad to announce that the airsoft Desert Tech Stealth Recon Scout A1 by Silverback Airsoft will be released on November 25th.
Our airsoft version of this awesome bullpup sniper rifle is built only in high quality materials:
- In order to respect most of the awesome features of the original SRS, we had to develop a new patented spring bolt system, push forward compression, spring guide less design. The bolt is made of a steel cylinder, steel cylinder head and steel bolt handle. Piston assembly is made of 6061 aluminium. It features a steel piston sear and the system will allow bolt quick change, no tools needed. Muzzle energy will range between 0.9 Joules to 1.7 Joules depending on your country regulations.
-Compatible with AEG silent piston heads and AEG springs (with a compressed length strictly inferior to 46mm and an inside diameter strictly superior to 11mm).
-Monolithic receiver: CNC 6061 T6 aluminium, a massive piece, over one kilogram, featuring the quick change attachment system patented by Desert Tech LLC. Each receiver has a unique CNC engraved serial number.
-Outer barrels made by CNC , 6061 T6 aluminium, deep fluting for 22'' and 26', with an inner diameter of 8.56mm, the AEG standard, eliminating the necessity of barrel spacers. The airsoft SRS is equipped with a 6.05mm brass inner barrel.
-Two way aluminium hop up unit, directly attached to the quick change barrel assembly, allowing barrel switch in seconds while keeping your hop up setting. Hop up setting is done by two screws on top of the rifle, through the receiver, with the provided key, without removing the barrel, the magazine or the optic.
-Railed handguard: CNC 6061 T5 aluminium and fiber reinforced nylon additional rails (3 pieces included). Rail system is attached to the receiver via a sturdy 38x2mm thread.
-Rifle stock is made of fiber reinforced nylon. Black, Flat Dark Earth and OD colors are available
-Fiber reinforced nylon buttpad extension (2 pieces included)
-Steel magazine, with reinforced nylon internal, 30 rounds capacity.
-Monopod, included with all Silverback Airsoft SRS, accurate replica of the Desert Tech LLC patented monopod, CNC 6061 aluminium.
-CNC aluminium trigger, with position and preload adjustment.
-No injection molding metal parts, no zinc alloy, all screws are in 10.9 steel.
The Silverback Airsoft SRS will be available in three versions:
-SRS A1 Covert, with a short handguard, 16 inches outer barrel and a checkered thread protection (420 mm inner barrel) with an overall length of 675 mm, minimum weight: 3.00 Kg.
-SRS A1 .308, with long handguard , 22 inches fluted outer barrel and the .308 flash hider (578 mm inner barrel) for an overall length of 850 mm, minimum weight: 3.22 Kg.
SRS A1 .338 LM, with long handguard , 26 inches fluted outer barrel and the .338LM flash hider (680 mm inner barrel) with an overall length of 980 mm, minimum weight: 3.34 Kg.
Spare barrels, handguards , rails, buttpad spacer, spare bolt, flash hiders and magazines will be available at the same time as the replica.
Added on 2015-10-31
SRS-A1: prototype presentation
Hi All,
A video of the prototype is available on Youtube, it will show you the bolt manipulation and shooting, we used a SRS A1 22" configuration, 6.05 mm barrel (578mm length), 0.20g bbs with a bolt delivering a muzzle energy of 1.7 Joule. A version below one Joule will be available.
Then you will see a quick conversion demonstration from a Covert 16" configuration to a A1 26". It will also show you how the airsoft model is similar to the real one.
We expect a release this fall, Hong Kong msrp will be around 500 USD. All interchangeable parts will be available: barrels, handguards, flahhiders, bolts, rails...
Stay tuned for updates, and thanks for watching!
A video of the prototype is available on Youtube, it will show you the bolt manipulation and shooting, we used a SRS A1 22" configuration, 6.05 mm barrel (578mm length), 0.20g bbs with a bolt delivering a muzzle energy of 1.7 Joule. A version below one Joule will be available.
Then you will see a quick conversion demonstration from a Covert 16" configuration to a A1 26". It will also show you how the airsoft model is similar to the real one.
We expect a release this fall, Hong Kong msrp will be around 500 USD. All interchangeable parts will be available: barrels, handguards, flahhiders, bolts, rails...
Stay tuned for updates, and thanks for watching!
Added on 2015-07-31
SRS-A1: 3D presentation
Hi All,
Here is a 3D assembly video introducing our coming Desert Tech licensed rifle, the Stealth Recon Scout A1 (SRS A1) Spring Bolt Airsoft Rifle.
We will use only high grade material for this Airsoft rifle:
- In order to respect most of the awesome features of the original SRS, we had to develop a new patented spring bolt system, push forward compression, spring guide less design. The bolt assembly is made of a steel cylinder, cylinder head and bolt handle. Piston assembly is made of 6061 aluminium. It will feature a steel piston sear and the system will allow bolt quick change, no tools needed. Muzzle energy will range between 0.8 Joules to 1.8 Joules depending on your country regulations.
-Receiver and outer barrel: CNC 6061 T6 aluminium.
-Railed handguard: CNC 6061 T5 aluminium and reinforced nylon additional rails.
-Rifle stock will be made of reinforced nylon, black, Flat Dark Earth and OD colors will be available
-Steel magazine, with reinforced nylon internal, 30 rounds capacity.
-Monopod, included with all Silverback Airsoft SRS, accurate replica of the Desert Tech LLC patented monopod, CNC 6061 aluminium.
-Two way aluminium hop up unit, directly attached to the quick change barrel assembly, allowing barrel switch in seconds while keeping your hop up setting. Barrel attachment is exactly like the original.
-CNC aluminium trigger, with position and preload adjustment.
-No injection molding metal parts, no zinc alloy, all screws are in 10.9 steel.
The Silverback Airsoft SRS will be available in three versions:
-SRS A1 Covert, with a short handguard , 16 inches outer barrel and a checkered thread protection (420 mm inner barrel) with an overall length of 675 mm, weight 2870 grams.
-SRS A1 .308, (the one displayed in this video) with long handguard , 22 inches fluted outer barrel and the .308 flash hider (578 mm inner barrel) for an overall length of 850 mm, weight 3130 grams.
SRS A1 .338 LM, with long handguard , 26 inches fluted outer barrel and the .338LM flash hider (680 mm inner barrel) with an overall length of 980 mm, weight 3250 grams.
Pictures and video of the prototype will be posted next month, we expect a release date during fall 2015.
Music credit: Project 1404, http://www.project1404.com
Added on 2015-06-16
Licenses agreement
Dear All,
We were quite silent for a while as we were working on important projects. We are proud to announce that Silverback Airsoft Ltd. is now the exclusive holder of two very promising licenses: Desert Tech LLC. and MPS (Military Police Systems).
It's too early to give you a release date or a price range but we are already working on the SRS from Desert Tech and the AA-12 from MPS. We can't give details at the moment but we'll do it right, by hardcore players for hardcore players, as soon as we'll have updates, we will post it on our Facebook page.
Have a nice week-end !
We were quite silent for a while as we were working on important projects. We are proud to announce that Silverback Airsoft Ltd. is now the exclusive holder of two very promising licenses: Desert Tech LLC. and MPS (Military Police Systems).
It's too early to give you a release date or a price range but we are already working on the SRS from Desert Tech and the AA-12 from MPS. We can't give details at the moment but we'll do it right, by hardcore players for hardcore players, as soon as we'll have updates, we will post it on our Facebook page.
Have a nice week-end !
Added on 2015-04-10
IWA 2014 outdoor show
We will be at the IWA 2014 outdoor show, visit us on the booth of our partner Airsoft Specialist, Hall 7A-310!
Check out our Facebook page!
Check out our Facebook page!
Added on 2014-03-04
